Description
Water Temperature Sensor AiM M10 × 1 – Rotax MAX
The AiM M10 × 1 water temperature sensor is intended for compatible Rotax MAX engine coolant measurement points. It allows a suitable MyChron system to read coolant temperature when used with the correctly matched sensor connection cable.
Key features and benefits
- M10 × 1 threaded water temperature probe.
- Commonly used with a compatible Rotax MAX coolant measurement point.
- Temperature measurement through an AiM MyChron TR sensor input.
Where and how to use it
Check the Rotax engine and coolant port before installation. A separate connection lead such as CAK-MCTR103 may be needed depending on the display configuration; the sensor should not be confused with the EGT thermocouple M5. Use the specified sealing method and check coolant tightness after fitting.
Technical details
| Part number | CTR-M10201 |
|---|---|
| Type | Water temperature sensor |
| Thread | M10 × 1 |
| Sensor technology | Thermoresistive (TR) |
| Sensor length | 30 cm variant |
| Application | Rotax MAX / compatible MyChron |
Choosing the right AiM accessory
Match the product part number, physical connection and intended application before ordering. For complete lap timing, use the compatible AiM display, sensor and power accessories required by your kart.













